Revival Cycles The Bueller Buell XB12X
File:The-Bueller 1.jpg | |
Revival Cycles The Bueller Buell XB12X | |
Manufacturer | |
---|---|
Weight | |
Manuals | Service Manual |
PhotosEdit
Revival Cycles The Bueller Buell XB12X Revival Cycles The Bueller Buell XB12X Revival Cycles The Bueller Buell XB12X Revival Cycles The Bueller Buell XB12X Revival Cycles The Bueller Buell XB12X Revival Cycles The Bueller Buell XB12X Revival Cycles The Bueller Buell XB12X Revival Cycles The Bueller Buell XB12X
OverviewEdit
The BuellerBuell XB12X by Revival Cycles
had one clear goal: to prove that you could jump,
air, and land this Buell XB12X. It was an ambitious goal, but
they managed to achieve the feat. Heres how!
Our final goal for this build was definitely to keep
the budget in line, as we didnt have much room for error, but to
prove that you could properly jump, air and land a bike of this
heft. We undoubtedly achieved that goal.
We started by completely disassembling the machine and ditching every single piece that wasnt critical and then went about shaving weight by replacing known heavy items. The heavy lead acid battery was tossed in favor of an anti-gravity Lithium-Ion one. The weight savings on the battery alone was almost 7 lbs. Then we ditched the heavy factory rear subframe in favor of something much much lighter. We built a model for the new subframe in CAD and then cut out the 3 piece panels from heavy gauge aluminum. It was then all welded together giving the rider a stout, thin, upright and comfortable seat that makes this dirt bike capable of being ridden all day on or off road.
Since the fuel is wisely and efficiently carried in
the frame, no custom fuel tank was needed, so we also built a custom
alloy body panel to take the place of the shoddy plastic unit that
came with the factory bike. This also allowed us the opportunity to
make room just above the engine for the battery, Motogadget M-unit
and all of the wiring. Revival has become known for our electronic
and electrical expertise and our ability to integrate it into our
custom bikes and this build was no different. We sell and install
more high end gadgetry from Motogadget than anyone else in the world
and the tidy nature of the Buell frame coupled with our reworking of
the overall design resulted in a subtle and almost invisible
installation of the modern technology at work here. We utilized a
factory Buell Racing ECU and the snap can be felt when this machine
puts all 115hp to the dirt!
We wanted the new owner of this machine to have the ability to ride all day at the track or off road and then still ride it home, so the lighting, license plate mount and street running gear is all tucked and out of harms way. Even the dual headlight unit is easily removed with a custom machined quick-release system we designed and built that can be stowed away for full track action and even more weight savings.
One of the things we hated about the factory Ulysses
was the ugly and heavy cast wheels that also would limit our choices
for knobby tires. So
we took on the difficult task of replacing them
with spoked Excel alloy wheels laced up to machined alloy Canyon TT
hubs that are actually made for the modern Triumph twins. We adapted
them to work with the Buell setup by reworking the axles and spacers
and even building a custom front and rear sprocket set, chain
tensioner and front sprocket cover to suit the overall design. We
also constructed a custom alloy skid plate to keep the rocks from
tearing up the bottom of the engine along with a high-mount front
steel fender and carefully mounted stainless twin outlet exhaust
system that ended up weighing some 20 lbs.+ less than the factory
unit and surprisingly effective at keep the engine noise to a
reasonable level. Its obvious the exhaust is very much inspired by
the board track racing Harleys of the early 1900s.
Quite a few of the custom pieces on this machine are
subtle and almost hidden from site. We didnt want to give up
functionality for form, so we hid much of the working gear. For
instance, this bike still has very effective turn signals in the
form of super bright LED rear sections built into the tail and
Motogadget M-blaze pin LED signals mounted along with the headlight.
Theres also a full gauge assembly built into one tiny Motogadget
Motoscope Pro gauge that is mounted just ahead of the handlebars.
This integrates seamlessly with the style of the bike so that you
can keep track of everything technical at a glance and still not
have the bulk of a factory gauge set.
With the design and form details worked out it was time to tackle the most important part, the suspension. We utilized the Buell XB12X front forks and modified them by using Aprilia fork lowers for longer travel, non-perimeter brake caliper mounting and to allow the spoke wheel conversion as well. We then custom machined a front brake rotor adapter to allow us to install a 4-piston Discacciati front brake caliper. This not only saved weight, but made a big difference in stopping power.
We then set about to make the rear suspension stack
up to the front. We re-sprung and re-valved the factory rear shock
for MX duty. We also relocated the remote reservoir to keep it out
of harms way. The result of all this suspension work is a MUCH more
capable off road machine that handles surprisingly well on asphalt
in the twisting roads of northern California. We took the machine to
the Quail Motorcycle Gathering in May of 2016 and it was flogged
through hundreds of miles pavement to rave reviews. This dirt bike
carves up the street too.
Although we started this bike as a budget build with what seemed like some very tight parameters, ultimately The Bueller ended up winning over most guys in the shop who now have visions of their own Harley-based dirtbike! Source